Andreas Dittes

hi i need it plzzzz i have exam 15-7-2006

please send me 640-801 finel exam paper befor 26.8.2006

need cisco networking 3.1 final exam answers

Please send the answer of CCNA1 final exam

I need it too. Would you mind sending it to me too.

Please send the answer of CCNA 4version 3.1 final exam..
thnx

Please send the answer of CCNA1 final exam

I would also like the CCNA 3 final exam and answers.

Thankyou

Hello there..
I would also like to have answers for 3.1 final exam
thnx already..

Cheers ,

Tia

Please send me, CCNA1: Networking Basics final exam please

please………………………………….send me ..

ccna 3.1semester final exam

please………………………………….send me ..

ccna 3.1semester final exam

dynd0863@naver.com

hi pleas send me the ccna 1 v 3.1 Final Exam Ansvers… pleasssss…

hi pleas send me the ccna 1 v 3.1 Final Exam Ansvers… pleasssss…

driver_man@hotmail.com

I need it too please….if you could send me the CCNA 1 v3.1 Final Exam I would really appreciate it

my mail is hugo_pg04@hotmail.com

please sent me ccna2 prefinal exam v 3.1.1 thanks

cismasiud@yahoo.com

I need it too can u send it to me also. Is it always the same test/exam?

Hello there..
I would like to have answers for 3.1 final exam
It would be a great help!
thnx already..

Greatings ,

Chris

Please send me the final exam for CISCO for CCNA 3.1 by mail.
Thank you in advance

Please send me the CCNA 3.1 final exam by mail.
Thank you soooooo much ^3^

Hi,
I’m looking for exams CCNA 3.1 semester 2 prefinal and final.
Can anyone mail them to me
dinatla@hotmail.com

Please send me answers here.
reyaguilar_1@hotmail.com

Thanks

Final Cisco Test – Semester 1

1. Which devices will create multiple collision domains in an Ethernet network? (Choose two.)
Switch router

2. How many collision domains are shown in the diagram?
Seven

3. Refer to the exhibit. The physical documentation shows a portion of the internetwork of the ABC Company. Which segments will be free of collisions?
segments 3, 4, and 5

4. Refer to the exhibit. Which diagram represents the network topology that an administrator would prefer, and why would the administrator prefer it?
Diagram A. It will better provide available bandwidth to the hosts.

5. After an unsuccessful ping to the local router, the technician decides to investigate the router. The technician observes that the lights and fan on the router are not operational. In which layer of the OSI model is the problem most likely occurring?
Physical

6. Refer to the exhibit. How many broadcast domains are shown?
Three
7.
Refer to the exhibit. A network associate needs to establish an Ethernet connection between Host A and Host B. However, the distance between the two hosts is further than the cabling standards allow. Which two devices that operate at the physical layer of the OSI can be used to allow Host A and Host B to communicate? (Choose two.)
hub repeater

8.
Refer to the exhibit. What must be configured on Host B to allow it to communicate with the file server? (Choose three.)
a unique host IP address the subnet mask for the LAN the default gateway address

9.
Refer to the exhibit. Host A pings Host B. What can be concluded about the source and destination addresses contained in the communication sent by Router R5 when it forwards the ping out the Ethernet interface to Host B? (Choose two.)
source MAC address: 5555.AAAA.6666 destination IP address: 192.168.10.134

10. What is the correct number of usable subnetworks and hosts for the IP network address 192.168.35.0 subnetted with a /28 mask?
14 networks / 14 hosts

11.
Refer to the exhibit. The network administrator wants to create a subnet for the point-to-point connection between the two routers. Which subnetwork mask would provide enough addresses for the point-to-point link with the least number of wasted addresses?
255.255.255.252

12.
Refer to the exhibit. A network technician is trying to determine the correct IP address configuration for Host A. What is a valid configuration for Host A?
IP address: 192.168.100.20; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.100.17

13. Two peer hosts are exchanging data using TFTP. During the current session, a datagram fails to arrive at the destination. Which statement is true regarding the retransmission of the datagram?
Datagram retransmission is controlled by the application.

14. Which protocols are TCP/IP application layer protocols? (Choose two.)
TFTP DNS

15. When using Category 5 UTP cable, which RJ-45 pin pairs are used to exchange data between hosts on an Ethernet network?
1 and 2; 3 and 6

16. In the exhibit, the connections between the devices are labeled A, B, C, D, and E. For each connection, what is the correct UTP cable to use?
A=rollover, B=straight, C=straight, D=crossover, E=crossover

17. Which cable diagram displays the end to end pinout for a crossover cable used with Cisco devices?
Cable C

18. Which subnet masks could be used when subnetting a Class B IP address? (Choose two.)
255.255.255.240 255.255.192.0

19. Which physical network topology is easy to monitor and troubleshoot, easy to add new devices to as the network expands, but subject to complete failure when a central hub or switch ceases to work?
Star

20. A computer technician is asked to make a network cable. One end of the cable is pinned as a 568A and the other as a 568B. For what purposes can this cable be used? (Choose two.)
to connect a switch to a switch to connect a hub to a switch

21. Refer to the exhibit. Workstation 1 pings the Fa0/1 interface of Router 1. Which MAC address will workstation 1 obtain during the ARP request for this communication?
00-08-A3-B6-CE-02

22. Refer to the exhibit. A network administrator has configured a network after subnetting the network number 192.168.0.0/28. Workstation 1 is not able to communicate with Workstation 2. What is the cause of this loss in communications?
Workstation 1 is not on the same network that the Router 1 LAN interface is on.

23. Which network device creates the highest amount of latency? Router

24. An Ethernet host receives a frame, calculates the FCS, and compares the calculated FCS to the FCS received in the frame. The host finds that the two FCS values do not match. What action will be taken by the host?
The host discards the frame.

25. A user initiates three simultaneous FTP connections from the local host to the same FTP server. Which OSI layer is responsible for establishing and managing these different FTP connections? Session

26. A network administrator has installed a 24 port switch and connected 10 computers with 10/100 NICs. If the NICs are operating at 100 Mbps, how much bandwidth is available for each computer to receive data? 100 Mbps

27. Based on the graphic above, which of the following occurs as each host system comes on line in the topology?
The switch adds MAC address to the bridge table as each host sends a frame.

28. Consider the networks shown in the exhibit. Host A is sending packets to host B. Which layer of the OSI model is being used when the router is making the calculated decision to determine which interface to send the packet out?
Network

29. Why would a company install a switch instead of a hub when building or expanding a corporate network?
A switch provides more bandwidth by sending frames only out the port to which the destination device is attached. A hub sends the frame out all ports except the source port.

30.

Refer to the exhibit. The hub and the switch are operating using factory default settings. Which hosts will receive the frame if host A transmits a broadcast frame?
Workstations B, C, D, E, and the router will receive the data.

31. Refer to the exhibit. What kind of Ethernet cable is represented?
straight-through cable

32. The ping command can be used to test connectivity between hosts. Which OSI model layers are verified by this test?
Layers 1, 2 and 3

33. A technician is testing connectivity between the devices using the ping command. Pings between Host B and Host A were successful. The technician could not ping the R3 address 172.16.3.2 from Host A. The technician issued ipconfig from Host A and saw the information displayed in the exhibit. What is the most likely problem?
The default gateway of Host A is incorrect.

34. Why do vendors utilize the OSI model when designing networking products?
It ensures greater compatibility and interoperability with equipment from different vendors.

35. A router determines the path to deliver a packet. What layer of the OSI model does this fact represent?
Network

36. How does a switch learn the addresses of hosts connected to its ports?
The switch reads the source MAC address on incoming frames and records it in CAM.

37. Refer to the exhibit. The connections in the exhibit are labeled A through E. Which of these indicate LAN links? (Choose two.)
link A link E

38. A large company has a network that is constantly changing. The routing tables in the routers need to be adjusted to reflect the changes in the routing paths. What type of routing would the network administrator implement?
dynamic routing protocols

39. A network administrator has added a new switch to the network. The new switch connects to an existing switch that is already installed. Which UTP cable correctly connects the new switch to the existing switch?
crossover

40. Refer to the exhibit. A newly hired technician has a task of terminating CAT 5 UTP cables. The network administrator visually examined the cables the technician terminated. Some of the cables have connectors as shown in the exhibit. What should the network administrator explain to the technician about the cables?
The cable in Graphic A will produce more crosstalk.

41. Refer to the exhibit. What is the order of the TCP/IP Protocol Data Units as data is moved as indicated through the OSI model?
bits, frames, packets, segments, data

42. Refer to the exhibit. Which type of UTP cable should be used to connect Host A to Switch1?
straight-through

43. Which technologies are considered to be LAN technologies? (Choose two.)
Token Ring Ethernet

44. Refer to the topology in the graphic. Which characteristic does this type of topology possess?
Communication continues in the event of a break in any one connection.

45. Which characteristics are common to both UDP and TCP? (Choose two.)
uses port numbers classified as a transport layer protocol

46. A router interface has been assigned an IP address of 172.16.192.166 with a mask of 255.255.255.248. To which subnet does the IP address belong?
172.16.192.160

47. Which type of address is 192.168.170.112/28?
subnetwork address

48. What is the decimal representation of the binary number 11111000?
248

49. What are important characteristics to consider when purchasing a network interface card? (Choose two.)
media used on the network system bus used on the computer

50. Which of the following statements are correct about CSMA/CD? (Choose three.)
It is a media access method used in LANs.
When a device needs to transmit, it checks to see if the media is available.
Only one device can successfully transmit at a time.

Semester 2 Final

1. What are some reasons to change the configuration register setting? (Choose two.)
to force the system to ignore the configuration file stored in NVRAM
to force the system into ROM monitor mode

2.
Given the output shown in the exhibit, in what order and location will the router search for the IOS if no boot system commands are found in the startup-config file?
Flash, TFTP server, ROM

3. Which statements are true regarding setup mode? (Choose three.)
Enter a question mark (?) for help at any point.
Press Enter to accept the default settings.
Press Ctrl-c to abort configuration dialog.

4. During initial router bootup the following line appears:”NVRAM invalid, possibly due to write erase.”What are two possible reasons for this result? (Choose two.)
The router has not been configured.
The startup-config file cannot be located.

5. A new technician must add boot system commands to one of the department routers. Which available commands will the router return as output when the command shown below is entered? (Choose two.)Router(config)# boot system ?
TFTP

Semester 2 Final

1. What are some reasons to change the configuration register setting? (Choose two.)
to force the system to ignore the configuration file stored in NVRAM
to force the system into ROM monitor mode

2.
Given the output shown in the exhibit, in what order and location will the router search for the IOS if no boot system commands are found in the startup-config file?
Flash, TFTP server, ROM

3. Which statements are true regarding setup mode? (Choose three.)
Enter a question mark (?) for help at any point.
Press Enter to accept the default settings.
Press Ctrl-c to abort configuration dialog.

4. During initial router bootup the following line appears:”NVRAM invalid, possibly due to write erase.”What are two possible reasons for this result? (Choose two.)
The router has not been configured.
The startup-config file cannot be located.

5. A new technician must add boot system commands to one of the department routers. Which available commands will the router return as output when the command shown below is entered? (Choose two.)Router(config)# boot system ?
TFTP

Semester 2 Final

1. What are some reasons to change the configuration register setting? (Choose two.)
to force the system to ignore the configuration file stored in NVRAM
to force the system into ROM monitor mode

2.
Given the output shown in the exhibit, in what order and location will the router search for the IOS if no boot system commands are found in the startup-config file?
Flash, TFTP server, ROM

3. Which statements are true regarding setup mode? (Choose three.)
Enter a question mark (?) for help at any point.
Press Enter to accept the default settings.
Press Ctrl-c to abort configuration dialog.

4. During initial router bootup the following line appears:”NVRAM invalid, possibly due to write erase.”What are two possible reasons for this result? (Choose two.)
The router has not been configured.
The startup-config file cannot be located.

5. A new technician must add boot system commands to one of the department routers. Which available commands will the router return as output when the command shown below is entered? (Choose two.)Router(config)# boot system ?
TFTP

Cisco Final – Semester 3

1.
Refer to the graphic. The network has converged. Network traffic analysis indicates that switch A should be the STP root bridge. However, switch F has been elected root bridge of the STP tree. The switches are all set to the default spanning-tree bridge priority value. How can the network administrator change the root bridge to switch A?
Configure the bridge priority of switch A to a 1.

2. When should EIGRP automatic summarization be turned off? when a router has discontiguous networks attached

3.
Refer to the output in the exhibit. What is true about the configuration of this switch?
ARP requests issued by the host on port Fa0/12 will be seen by all hosts on the PROD VLAN.

4.

Refer to the OSPF network in the exhibit. Router REMO_2 has been elected DR, but router REMO_1 is the more powerful router. How can the network administrator configure REMO_1 to force it to be elected as DR?
REMO_1(config)# interface fastethernet 0/0REMO_1(config-if)# ip ospf priority 255

5. What are three attributes of distance vector routing protocols? (Choose three.)
Each router sends its entire routing table in routing updates.
Periodic updates are sent to neighboring routers.
Becuz of their frequent periodic updates, distance vector protocols after convergence use more bandwidth than link-state protocols do.

6.

The network administrator shown in the exhibit is connected to an Ethernet LAN port on SW_1. The administrator needs to verify the configuration of the newly installed switch SW_2. What must be done so that the administrator can access SW_2 with a web browser? (Choose three.)
Establish connectivity of the host to SW_2.
Configure IP addressing parameters on SW_2.
Activate the HTTP service on SW_2.

7.

Refer to the exhibit. What will be the result of DR elections in the OSPF network shown? (Choose three.)
R1 will be DR of the 192.168.4.0/24 network.
R1 will be DR of the 192.168.5.0/24 network.
R3 will be DR of the 192.168.6.0/24 network.

8. Which of the following tasks must be completed to configure a router interface to serve the newly added network 192.168.10.64/27 and to advertise this network over RIP v2? (Choose three.)
RIP v2 must be configured with the network command and the IP network number for the new network.
A network host address and subnet mask must be applied to the newly activated interface.
The routing protocol must be activated with the router rip and version 2 commands.

9. Which of the following statements are true about routers that are running EIGRP? (Choose three.)
They can support multiple routed protocols.
They send partial routing updates in response to topology changes.
They use hello packets to inform neighboring routers of their status

10. Refer to the exhibit. Which set of commands should be used on the router to provide communication between the two hosts connected to the switch?
R_1(config)# interface fastethernet 0/0 R_1(config-if)# no shutdown R_1(config-if)# interface fastethernet 0/0.3 R_1(config-if)# encapsulation dot1q 30 R_1(config-if)# ip address 192.168.30.1 255.255.255.0 R_1(config-if)# interface fastethernet 0/0.4 R_1(config-if)# encapsulation dot1q 40 R_1(config-if)# ip address 192.168.40.1 255.255.255.0

11.

Refer to the exhibit. Two Catalyst switches are connected, and both switches have ports configured for VLANs 40 and 50 as shown. What will allow hosts on the same VLAN to communicate with one another across the different switches?
trunking

12.

Refer to the exhibit. A company always uses the last valid IP address in a subnetwork as the IP address of the router LAN interface. A network administrator is using a laptop to configure switch X with a default gateway. Assuming that the switch IP address is 192.168.5.147/24, what command will the administrator use to assign a default gateway to the switch?
X(config)# ip default-gateway 192.168.5.254

13. What is the first step in the spanning-tree process? elect a root bridge

14.

Refer to the graphic. What is the first parameter used to determine which switch is selected as the root bridge in the spanning-tree process?
lowest priority number

15.

Refer to the routing table shown in the exhibit. What is the meaning of the highlighted value 192?
It is the metric, which is cost.

16. Which of the following statements is true when VTP is configured on a switched network that incorporates VLANs?
Changes made to the network can be communicated to all switches dynamically

17.
Refer to the graphic. What is the most efficient summarization of the routes attached to router RT-5? 192.168.52.0/22

18. A network administrator is removing several VLANs from a switch. When the administrator enters the no vlan 1 command, an error is received. Why did this command generate an error? VLAN 1 is the management VLAN by default and can not be deleted.

19. What are two advantages of adding switches to a network that has no VLANs configured? (Choose two.)
Switches help eliminate collision domains
Switches allow bandwidth to be fully utilized.

20. Refer to the exhibit. Assuming that VLANs are not configured on the switch, how many broadcast domains are there?
one

21.

Refer to the network and command output shown in the exhibit. A network administrator located at the Branch1 site needs to check the configuration of a switch located at the Central office. Which command can be used to gain remote access to the Central LAN switch, assuming the switch is assigned the IP address 192.168.10.238/24?
Branch1# telnet 192.168.10.238

22. Which statements describe features of full-duplex Ethernet? (Choose three.)
allows packets to be received and sent simultaneously by a host
reduces the number of collisions
allocates 100 percent of the bandwidth in both directions

23. The following command was added to a router configuration: ip route 198.19.150.0 255.255.255.0 192.0.2.249 What two effects will this command have?
Information about the 198.19.150.0 network learned dynamically will be ignored as long as this configuration command is in effect

24.

Refer to the exhibit. Each switch is shown with its MAC address. Which switch will be elected as the spanning-tree root bridge if the switches are configured with their default priority values?
switch F

25.

Refer to the exhibit. Which configuration commands will direct outbound traffic from RT-2 to the ISP and inbound traffic from the ISP to network 192.0.2.0/27?
RT-2(config)# ip route 0.0.0.0 0.0.0.0 serial 0/1ISP(config)# ip route 192.0.2.0 255.255.255.224 serial 0/0

26.

Refer to the exhibit. Which group of commands will correctly configure router ABC to use OSPF?
ABC(config)# router ospf 1 ABC(config-router)# network 192.168.43.64 0.0.0.31 area 0 ABC(config-router)# network 192.168.43.248 0.0.0.3 area 0

27.

Refer to the exhibit. Routers RT-1 and RT-3 are completely configured. The administrator needs to configure the routing protocol on router RTR-2 so that communication occurs throughout the network. Which group of commands will successfully configure EIGRP on RTR-2?
RTR-2(config)# router eigrp 1 RTR-2(config-router)# network 198.198.76.0

28. Employees of XYZ Company connect their laptop computers to the office LAN using Ethernet ports. The Cisco switches used in the company network are configured with port security. At which layer of the three-layer design model do these switches operate? access

29.

Refer to the graphic. Switch 2 has computers attached that belong to VLAN 2. Switch 3 has computers attached that belong to VLAN 3. Switch 1 is a Cisco 2926G Layer 3 switch that has a route module installed. Switch 1 provides connectivity to the other switches and is used to route between the VLANs. At which layer of the three-layer switch design model does Switch 1 operate?
distribution

30. A network administrator is having problems with excessive collisions on the corporate network. If the network currently uses hubs, what is the most cost effective way to reduce collisions?
replace hubs with switches

31.
Refer to the exhibit. Which command will remove the static address from the MAC address table?
ALSwitch(config)# no mac-address-table static 00e0.2917.1884 interface fastethernet 0/4 VLAN 1

32. Refer to the exhibit. If the network is running RIP v2, which subnetworks can be assigned to the serial links between RTR-2 and the two other routers?
198.19.23.192/30 and 198.19.23.196/30

33. Which layer of the hierarchical three-layer design model combines traffic from multiple IDFs? distribution

34.

Refer to the graphic. The host on VLAN 2 cannot communicate with the host on VLAN 3. Which of the following could be the problem based on the output of the show interface fastethernet 0/1 command from the switch?
The router interface connected to switch port 1 is shut down.

35. Which two statements describe Spanning Tree Protocol? (Choose two.)
It eliminates Layer 2 loops in network topologies.
It can only be used in networks in which Layer 2 switching is in use.

36.

Refer to the exhibit. How should an administrator configure the ports on switches ACC-1 and ACC-2 to allow hosts on the same VLAN to communicate across the two switches?
As trunks

37. What does a constant green SYSTEM LED indicate on a Catalyst switch?
The switch has passed POST and is working properly

38. What is the value of using the authentication feature that is available for OSPF information exchanges? (Choose two.)
It ensures that routing information comes from a valid source router.
It prevents routing information from being falsified in transit.

39. How do EIGRP routers establish and maintain neighbor relationships?
by exchanging of hello packets with neighboring routers

40. Refer to the exhibit. Which sequence of commands is required to configure switch port Fa0/2 for host A?
SW-1(config)# interface fastethernet 0/2SW-1(config-if)# switchport mode access SW-1(config-if)# switchport access vlan 20

41. Refer to the exhibit. What does “FORWARDING” mean in the command output shown? The switch is sending and receiving data frames.

42.

Refer to the exhibit. What is an advantage of this network design?
It provides multiple paths for connectivity in the event of link failure.

43.

Refer to the exhibit. Routers East and West are configured using RIPv1. Both routers are sending updates about their directly connected routes. The East router can ping the West router serial interface and West can ping the serial interface of East. However, neither router has dynamically learned routes from the other. What is most likely the problem? VLSM is not supported by RIPv1.

44.

Refer to the network and user requirements in the exhibit. The company has obtained one Class C network address. Which IP addressing plan will correctly utilize VLSM to provide maximum efficiency in the use of the IP addresses?
192.168.1.0/26 for the 61 users 192.168.1.64/27 for the 28 users 192.168.1.96/28 for the 14 users 192.168.1.112/30 for one serial link 192.168.1.116/30 for the other serial link

45. Which characteristics of RIPv1 are different from RIPv2? (Choose three.)
its use of broadcast updates
the authentication of updates
its exclusively classful routing

46. Which switching method increases latency and reliability more than any other method? store-and-forward

Cisco Semester Four – Final Exam

1. Which of the following describes the roles of devices in a WAN?
A CSU/DSU terminates a digital local loop.
A modem terminates an analog local loop.
A router is commonly considered a DTE device.

2. What value in the address field of a Frame Relay header identifies the destination of the frame? DLCI

3. The serial PPP link between the Left and Right routers is configured as shown in the diagram. Which configuration issue explains why the link is unable to establish a PPP session? The usernames are misconfigured.

4. The output of the show interfaces serial 0/0 command for a frame-relay connection indicates that the serial line is up but the line protocol is down. What are possible causes for this? (Choose two.) (2 / 5)
There is an LMI-type mismatch between the Frame Relay switch and the router.
The cable is disconnected.

5. Which statements are correct about the point in the network where the responsibility of the service provider ends?
The International point is on the customer side of the network terminating unit(NTU).
The United States point is at the interface of the customer-provided equipment and the local loop.
The point is called the demarcation point.

6. While prototyping an internetwork in the corporate lab, a network administrator is testing a serial link between serial 0/0 interfaces on two routers. The labels on the serial cable ends have been damaged and are unreadable. What command can be issued to determine which router is connected to the DCE cable end? show controllers serial 0/0

7. A network technician determines DHCP clients are not working properly. The clients are receiving IP configuration information from a DHCP server configured on the router but cannot access the Internet. From the output in the graphic, what is the most likely problem? The DHCP pool is not bound to the interface.

8. A technician enters the interface serial 0/0.1 multipoint command when configuring a router. What effect will the multipoint keyword have in this configuration?
Split-horizon issues will need to be resolved for this network if RIP is the routing protocol.
All the participating interfaces of remote routers will be configured in the same subnet.

9. When configuring a Frame Relay connection, when should a static Frame Relay map be used?
when the remote router does not support Inverse ARP
when broadcast traffic and multicast traffic over the PVC must be controlled

10. Which router command would be used to associate a Layer 2 address with the corresponding Layer 3 address in the internetwork in the diagram? RouterA(config-if)#frame-relay map ip 192.168.15.2 100 broadcast

11. Which of the following ISDN protocols is responsible for call setup and call teardown? ITU-T Q.921

12. What are two ways to resolve split-horizon issues in a Frame Relay network? (Choose two.) (2 / 5)
create a full-mesh topology
use point-to-point subinterfaces

13. What is the purpose of the command marked with an arrow shown in the partial configuration output of a Cisco 806 broadband router? defines which addresses are allowed into the router

14. A system administrator is unable to ping the Serial0/0 interface of RouterB from RouterA. During the troubleshooting process, the following facts are established: (0 / 5)
- IP addressing and subnet masks are correct.
- RouterA is a Cisco router and RouterB is a router from another vendor.
- RouterA is configured with the default encapsulation.
- The serial interfaces on both routers are up.
- The protocol is down on the serial interfaces of both routers.

15. What should the administrator do to solve the problem? Change the encapsulation on both routers to PPP.

16. An ISDN circuit from a branch office is remaining connected to the regional office. A network administrator determines a user has initiated a continuous ping from a desktop computer to the regional office. Which configuration change would allow the ISDN circuit to disconnect during any attempts to ping, while otherwise functioning properly?
change the dialer list to exclude ICMP as interesting

17. - call is made (1 / 6)
3,2,1,4

18. Which protocol should be chosen to support WAN connectivity in a multi-vendor system and provide strong security through authentication? PPP with CHAP

19. Which of the following are valid steps for a basic ISDN BRI configuration?
set the SPIDs if required by the ISDN switch

can you plz send me the answer of cisco 3 and 4 @ my email,,,jay_ar4@yahoo.com???is anybody have a copy of this…tnxsss

why are there only 5 answers for Semester 2 Final?

plz update ;D

Hi,

can you please send me the answers for CCNA 3 v3.1.
prrimuss@yahoo.com

Thank you.

could you send me the answers from cisco module 5 / 14
to skywalker750@gmail.com

Hello

could you send me the answers and questions from cisco CCNA semestr 1 FINAL TEST, please

Hello

could you send me the answers and questions from cisco CCNA semestr 1 FINAL TEST, please

my mail is: lednicky@email.cz

Hi

could you send me the answers and questions from cisco CCNA semestr 1 FINAL TEST, please

ccna 3 final exam questions already changed.
A lot of new questions.
Please update.

im taking up cisco 2 version 3.1… can you pls give me a copy of all the module answers?… pls…. i badly need it because i always got a failing grade… pls… pls send it to my email: princess_ennaidael_14@yahoo.com.ph

Hi,
I’m looking for exams CCNA 3.1 semester 2 final.
Can anyone mail them to me

harunaydem@gmail.com

in Turkey

Hi,
why are there only 5 answers for Semester 2 Final?
I don’t understand it, too…

could you send me the answers and questions from cisco CCNA semestr 2

please

harunaydem@gmail.com

in Turkey

I need the answers to the Module Exams for Semester 1 and 2…can you help?

Thanks!!!

I need the answers to the Module Exams for Semester 1 and 2…can you help?

Thanks!!! Please send to charles.crane@hotmail.com

I need URGENTLY answers for the CCNA4 Final Exam! Please HELP…!!!

THANKS!!! stefgeorgiev@yahoo.ca

I’m looking for exams CCNA 3.1 semester 3.
Can anyone mail them to me: ylberi_imeri@hotmail.com

Could you please send me the questions and anwser’s to semester two, thank you…

Could you please send me the questions and anwser’s to semester two, thank you…wynne_401@hotmail.com

can you send the semester 2 - 4 modules and the final exams to my email add pllsssss nazamy101@yahoo.com tnx very much i need this for my review…..

tnx very much

can you send the semester 2 - 4 cisco version 3.1 modules and the final exams to my email add pllsssss nazamy101@yahoo.com tnx very much i need this for my review…..

tnx very much

can you send the semester 3 - 4 cisco version 3.1 modules, Practice final, CNS practice and the final exams to my email add pllsssss daffy_d_z@yahoo.com tnx very much i need this for my review….

can you sen the semester 3 cisco version 3.1 final exams to my email add: manhtai264@yahoo.com
thank very much

ur the best!!

hello can you plesa send me cisco ccna semester 2 finaltest answers…….please

hello can you plesa send me cisco ccna semester 2 finaltest answers…….please my

hello can you plesa send me cisco ccna semester 2 finaltest answers…….please my mail is martinjuelsholt@msn.com

Hey ill try again

can someone pleaze send me the cisco ccna sem 2 final test answers…… ive got exams in one week my mail is
martinjuelsholt@msn.com

Hey ill try again

can someone pleaze send me the cisco ccna sem 2 version 3.1 final test answers…… ive got exams in one week my mail is
martinjuelsholt@msn.com

can someone pleaze send me the cisco ccna sem 2 version 3.1 final test answers…… ive got exams in one week my mail is
jitenshu@gmail.com

can you sen the semester 3 cisco version 3.1 final exams to my email add: gabymaan@gmail.com . Thx in advance!!!

Hi can you please send me CCNA v3.1 final exam please? I would really appreciate it thank you

Hi can you please send me CCNA v3.1 final exam for semester 1 please? I would really appreciate it thank you

Hi can you please send me CCNA v3.1 final exam for semester 1, 2, 3, 4 and 5 please? I would really appreciate it thank you

Ragingazn628@gmail.com

Thank you.

Hi! Could you please send me CCNA 3.1 final exams for semester 2 and 3?

amiga024@hotmail.com

Thank you for help!

Hello all i have semester 2 and 3 modules and final will trade for semester 4 module and final email me at stovokor@gmail.com

HI, Can someone send me the answers of the final exam for semester 2 version 3.1

HI, Can someone send me the answers of the final exam for semester 2 version 3.1 my email is nlopezpr@yahoo.com

hello,can you send me please any questions for cisco

Im going to have the final exam of ccna semester 2 in 3 days and i need the answers of the exam if someone is reading this PLEASE send me the answers,the exam is version 3.1,thanks. Email:nlopezpr@yahoo.com

please send me final2 examen and practice examen.question are more important then answers.
thank you
kassourirachid1@eircom.net

hi, can anybody help me by sending the ccna 2 version 3.1 final exam answers…of the currently exam held..i will be thakfull to you.. thnx.

hi, can anybody help me by sending the ccna 2 version 3.1 final exam answers…of the currently exam held..i will be thakfull to you.. thnx.

dharastic22@yahoo.com

Has anybody received any answers for their request for the CCNA Final exams?

please send me a cisco1:networking basic answer for final exam
thanks before

if someone can please send me semester 2 exam awsers i will be really greatful as i have really struggled in this semester

tkd_onizuka@hotmail
kostonhumar@aol.com

thnx a million

Can someone plz send me the answers to Final Exam 2, 3, 4?

weazel101010@hotmail.com

Bittse sende mich ccna 2 und ccna 3 tests final
danke sehr

Bittse sende mich ccna 2 und ccna 3 tests final
danke sehr

b_r_i_a_n_8_7@hotmail.com

i need it too,ccna 3.
i will take it tomorow,on tuesday.
please save me thomas_1708@hotmail.com

Can someone plz send me the answers to Final Exam 1,2, 3,4

Can someone plz send me the answers to Final Exam 1,2, 3,4

davidemiceli@tiscali.it

Hi there,
Has anyone got ALL the answers for the CCNA semester 2 Final Exam?
I’d very much appreciate it.
Chacho

Please any one with the new cisco answer :WLANs
wireless local area network. should plsease send it to my mail address below.taolads@yahoo.com

Please send me semester 2 final, thank you, Heather

Please send me semester 2 final, thank you, paul

please send me semester 1 final ,thank you

Hi, can someone please send me all the answers for the Cisco Semester 2 Final? Thanks!

My email address is ryanx26@gmail.com

ok im now on the verge of quiting now i am tottaly lost i am on semester 2 on the ccna final practice

Your task is to perform basic RIP and access control list configuration on a three router network

i havent got a clue i havent been able to use the packet tracer or anything like tht if someone can tell me or send me the information on how to do it i will be so greatful as i have had such a hard ass couple of weeks as my stupid lecture dude doesnt turn up what a fag

ok im now on the verge of quiting now i am tottaly lost i am on semester 2 on the ccna final practical

Your task is to perform basic RIP and access control list configuration on a three router network

i havent got a clue i havent been able to use the packet tracer or anything like tht if someone can tell me or send me the information on how to do it i will be so greatful as i have had such a hard ass couple of weeks as my stupid lecture dude doesnt turn up what a fag

plzzzzzzzzzzzzzzzzzzzzzz send me papers of ccna4 module 3,4,5,6, practice final n final i ll b highly thankful to u

plzzzzzzzzzzzzzzzzzzzzzz send me papers of ccna4 module 3,4,5,6, practice final n final i ll b highly thankful to u my email address is shehlasd@yahoo.com

hello friend i would very grateful if you send me the final ccna2.because my exams is very soon thank in advance.my email is ged@servihoo.com

hi can email me ccna 3 final exam answer and CCNA 4 module exam

pliz send me questions and answers for module 6 and ccna4 final exm
email: cavenderits@yahoo.com

Are the questions now same as they were i 2006 ???

Hey man can u send me the answers for cisco module 9 and 10 ver: 3.1
CCNA 1 plz

Hey man can u send me the answers for cisco module 9 and 10 ver: 3.1
CCNA 1 plz my email zerolv30000@aol.com

I search urgently the Final Exam CCNA3 3.1 or 3.11 I have the esam in 3 Days.
Please Help me and send me the answers and questions!!!
sandra.t-1@hotmail.com

Can u send me the answers for the final exams of cisco ccna v3.1 1-4 module. Tnx

Can u send me the answers for the final exams of cisco ccna v3.1 1-4 module. Tnx sliver7@hotmail.com

I want the questions and the answers for ccna2 final exam , i did the exam today but i mus doit again .
tnx

thanks
Can you sent me link to all cisco ccna2 final exeams

Please help me urgently! I search the questions and (correct) aswers whith graphic from the final exam ccna3 v3.1 ? I have this Friday (16.02.07) the Final exam.

PLEASE HELP ME!

Please send me the questions or good links on my email:
sandra.t-1@hotmail.com

Thanks!
Sandy

Please I need ccna 2 finals questions and answers. Thank you

Please could u send me CCNA semester 1 final Q’s

Hellow
Could you pls. give me the current voucher

Hello, Could you please send me CCNA 2 Module test answers and CCNA 2 Final exam thanks.

Hello, Could you please send me CCNA 2 Module test answers and CCNA 2 Final exam thanks. Email address is seanie3@hotmail.com

Can u send me the Full Final Exam with Solve of CCNA Semester 2

Can anyonesend me the Full Final Exam with Solve of CCNA Semester 2 ? Thanx in advance.

Anyone can send me the Full Final Exam with Solve of CCNA Semester 2 ?

Thanx in advance.
mail to : marifulhuq@gamil.com

pliz send me all the answers for sem three and four i have them this week,
you can send it to my mailing add.
domoex@yahoo.com

Hello, Could you please send me CCNA 2 Module test answers and CCNA 2 Final exam thanks.

I search urgently the Final Exam CCNA3 3.1 or 3.11 I have the exam soon
Please Help me and send me the answers and questions!!!

I search urgently the Final Exam CCNA3 3.1 or 3.11 I have the exam soon
Please Help me and send me the answers and questions!!!
to podonnell@ctstelecom.com

Can u please send me answers ane exams for all the 4 semesters.Jut started CCNA but if seems Hard
Email me on : Dexixy@gmail.com

Hi, Could you please send me CCNA 2 Module test answers and CCNA 2 Final exam thanks.

Could you please send me CCNA 1 Module test answers and CCNA 1 Final exam thanks.

Could you please send me CCNA 1 Module test answers and CCNA 1 Final exam thanks.

email: stano_benko@pobox.sk

Hi can any one email/send the answers to Sem 1 Practise Final cheeers

any one have the final for ccna 3 online exam with the photos (Final Cisco Test – Semester 1) and did any one try this anser in the exam and what result did you get

any one have the final for ccna 3 online exam with the photos (Final Cisco Test – Semester 1) and did any one try this anser in the exam and what result did you get

highwire07@gmail.com

Could you please send me CCNA 1 Module test answers and CCNA 1 Final exam thanks.

Need Answers for CCNA3 - Thanks - please email to ksoom2001@yahoo.com

I´m going to do final exam CCNA2 as somone knows the correct version or as done this year yet? and send me the complete exam with answers please?

thanx i apreciate…………

I´m going to do final exam CCNA2 as somone knows the correct version or as done this year yet? and send me the complete exam with answers please?

thanx i apreciate………… please e-mail me phrc@sapo.pt

Hi Andreas…!!!

I find your site very helpfull !!!

Can i have the rest CCNA 2 final exam answers because i get only the first five….!!!

Thanksss very much!!!!

plz mail me CCNA 2 final exam answers, 2007
pruthi.vaibhav@gmail.com

thanku..!

hello i looking for final ccna2 please send me it on my email ged@servihoo.com..
i must do my second attemps very soon

Hi …
this site is jt tooo good..
Can i hv the rest CCNA 2 final exam answers because der’s only the 1st five in here…plz..
thx in advance..

hey see for the ccna ver 3.1 final exam number 1 are u sure they are the correct answers plzzzzzz email me back to tell mne if u r dead sure they are correct

hellllllllllo neeeeed to no m8 there defo correct exam tomoz

i need help to i just messed up on my first test and i have to redo it wednesday, i need answers for version 3.1 final

i need help to i just messed up on my first test and i have to redo it wednesday, i need answers for version 3.1 final, my email is ghetto_blaster71@yahoo.com

hello i looking for ccna2 version 3.1 1-5 modul answers please send me it on my email julija.boiko@gmail.com
thx

how many questions exactly are there in semester 4 CCNA final, can you email me the questions and answers to semester 4 CCNA final, please as i have my exams in a few days. there are only 19 questions on this page

hey buddy can u send me semester 2 exam , also why is there only 5 questions is tht how many there are? / too cheers m8 keep up good work

Hey could you send me CCNA 2: Routers and Routing Basics v3.1 2nd semester final?
Thanks in advance

monnewbie3@hotmail.com